Tooth bonding or dental bonding uses a special tooth-coloured resin which is applied to the tooth then hardened using a special light. This bonds the resin to the tooth either to restore it or to improve the appearance of the tooth.
For what conditions is dental bonding considered?
Dental bonding is an option that can be considered to:
- Repair decayed teeth (composite resins are used to fill cavities)
- Repair chipped or cracked teeth
- Improve the appearance of discoloured teeth
- Close spaces between teeth
- Make teeth look longer
- Change the shape of teeth
- Use as a cosmetic alternative to amalgam fillings
- Protect a portion of the tooth's root that has been exposed when gums recede
What is the procedure for having a tooth bonded?
- Preparation. Little advance preparation is needed for dental bonding. Anaesthesia is often not necessary unless the bonding is being used to fill a decayed tooth. Your dentist will use a shade guide to select a composite resin colour that will closely match the colour of your tooth.
- The bonding process. Next, the surface of the tooth will be roughened and a conditioning liquid applied. These procedures help the bonding material adhere to the tooth. The tooth-coloured, putty-like resin is then applied, moulded, and smoothed to the desired shape. An ultraviolet light or laser is then used to harden the material. After the material is hardened, your dentist will further trim and shape it, and polish it to match the sheen of the rest of the tooth surface.
- Time to completion. Dental bonding takes about 30 to 60 minutes per tooth to complete
What are the advantages and disadvantages of dental bonding?
- Advantages: Dental bonding is among the easiest and least expensive of cosmetic dental procedures. Unlike veneers and crowns, which are customised tooth coverings that must be manufactured in a laboratory, bonding usually can be done in one clinic visit unless several teeth are involved. Another advantage, compared with veneers and crowns, is that the least amount of tooth enamel is removed. Also, unless dental bonding is being performed to fill a cavity, anaesthesia is usually not required.
- Disadvantages: Although the material used in dental bonding is somewhat stain resistant, it does not resist stains as well as crowns. Another disadvantage is that the bonding materials do not last as long nor are as strong as other restorative procedures, such as crowns, veneers, or fillings. Additionally, bonding materials can chip and break off the tooth.
Because of some of the limitations of dental bonding, some dentists view it as best suited for small cosmetic changes, for temporary correction of cosmetic defects, and for correction of teeth in areas of very low bite pressure (for example, front teeth). Consult with your dentist about the best cosmetic approach for your particular problem.